Roll-off containers acc. to DIN 30722, part 1 and 2:
Ribless version:
- Steel sheet thickness: Floor 5 mm/ sides and gates 3 mm (Hardox)
- Rib spacing in the floor: 625 mm
- Rib spacing in the side walls: –
- Reinforced last rib: 1 x U200
- Additional side reinforcement at 1/ 2 height, both sides
- Angle between floor and wall: 90°, rounded corner
- Hook adaptation: 50 mm (St 52-3), height 1570 mm
- Upper profile reinforced
- Double-wing gate, openable to 270, with flush-mount or Dutch lock
- Central lock, controlled from the side at 1200 mm, from the rear
- Stairs welded on front wall
- Two lubricated hinges at the gate (up to a height of 1250 mm)
- Three lubricated hinges at the gate (up to a height of 1500 mm)
- hooks
- safety level L4 acc. to standard
- Two lubricated steel rolls 300 x 160 mm, axle Ø 40 mm
- Sandblasting, primed and RAL-colour painted
Depending on customer needs:
- various steel sheet thicknesses
- mechanical/ hydraulic cover
- tarpaulin
- cover
- retroreflective components
Roll-off containers acc. to DIN 30722, part 1 and 2:
Structure:
- Steel sheet thickness: Floor 6 mm/ sides 4 mm (St 37-2)
- Rib spacing: 625 mm/ C-profile ribs: 70 x 50 x 4 mm
- Reinforced last rib: 2 x 120 mm, hoto
- Additional side reinforcement at 2/ 3 height, both sides (up to a height of 1500 mm)
- Angle between floor and wall: 45°
- Hook loader adaptation, hook: 50mm (St 52-3), height 1570mm
- Upper profile: pipe, Ø 88.9mm
- Double-wing gate, openable to 270, with flush-mount or Dutch lock
- Central lock, controlled from the side at 1200 mm, from the rear
- Stairs welded on front wall
- Two lubricated hinges at the gate (up to a height of 1250 mm)
- Three lubricated hinges at the gate (up to a height of 1500 mm)
- hooks
- safety level L4 acc. to standard
- Two lubricated steel rolls 300 x 160 mm, axle Ø 40 mm
- Sandblasting, primed and RAL-colour painted
Depending on customer needs
- various steel sheet thicknesses
- mechanical / hydraulic cover
- tarpaulin
- flap
- retroreflective components
Mulda-type container acc. to standard DIN 30720-1
Structure
- Floor width 1650 mm
- Steel sheet thickness: Floor 6 mm/ sides 4 mm (St 37-2)
- Reinforced corners
- Triple bilateral inner lock
- Hooks
- Sandblasting, primed and RAL-colour painted
Depending on customer needs
- Various steel sheet thicknesses
- Holes
- Flap
- retroreflective components
Kontener typu Mulda wg. Normy DIN 30720
Structure:
- Floor width 1600 mm
- Steel sheet thickness: Floor 6 mm/ sides 4 mm (St 37-2)
- Reinforced corners
- Single unilateral external hitch
- Hooks
- Sandblasting, primed and RAL-colour painted
Depending on customer needs:
- various steel sheet thicknesses
- Holes
- Flap
- retroreflective components
Mulda-type container – eg. Multicar
Structure:
- symmetrical/ asymmetrical
- Floor width: 1100 mm
- Floor length: 1210 mm
- Steel sheet thickness: Floor 4 mm/ sides 3 mm (St 37-2)
- Reinforced corners
- Single unilateral external hitch Ø30
- Hangers Ø30
- Tip grips
- Hooks
- Sandblasting, primed and RAL-colour painted
Depending on customer needs
- various steel sheet thicknesses
- Holes
- Flap
- retroreflective components
Mulda-type container acc. to standard DIN 30720 – Hamburger
Structure
- Floor width 1600 mm
- Underfloor structure UNP160
- Steel sheet thickness: Floor 6 mm/ sides 4 mm (St 37-2)
- Reinforced corners
- Single hitch under floor
- Hooks
- Rear: double-wing gate or flap
- Sandblasting, primed and RAL-colour painted
Depending on customer needs
- various steel sheet thicknesses
- Holes
- retroreflective components
- Mechanical / hydraulic roof
Mulda-type container acc. to standard DIN 30720-1 with roof
Structure
- Symmetrical structure
- Floor width 1650 mm
- Steel sheet thickness: Floor 6 mm/ sides 4 mm (St 37-2)
- Reinforced corners
- Triple bilateral inner hitch
- Steel roof with moving or eccentric lock
- Sandblasting, primed and RAL-colour painted
Depending on customer needs
- various steel sheet thicknesses
- DuraFlex plastic roof with chain lock
- Flap
- retroreflective components
Mulda-type container acc. to standard DIN 30720 with roof
Structure
- Symmetrical structure
- Floor width 1600 mm
- Steel sheet thickness: Floor 6 mm/ sides 4 mm (St 37-2)
- Reinforced corners
- Bilateral single external hitch
- Steel roof with moving or eccentric lock
- Sandblasting, primed and RAL-colour painted
Depending on customer needs
- various steel sheet thicknesses
- DuraFlex plastic roof with chain lock
- Flap
- retroreflective components